Cat6A Plenum 1000ft Cost: What to Expect in 2026
If you’re ready to order, here is the short answer: a 1000ft box of unshielded, bare copper, listed Cat6A plenum cable costs roughly $290 to $550 in 2026. Shielded versions run about $500 to $780. Anything far below that range deserves a closer look before you buy.
Price alone can mislead you on a 1000ft box. A cable that looks cheap can fail certification testing, be rejected by an inspector, or need re-pulling after install. This guide explains what drives the cost of Cat6A plenum 1000ft cable, what a fair 2026 price looks like, and the red flags that point to a suspiciously cheap option.
Quick answer: Expect about $0.29 to $0.55 per foot for unshielded bare copper Cat6A plenum, and about $0.50 to $0.78 per foot for shielded. For comparison, the same-length Cat6 plenum costs roughly $0.14 to $0.26 per foot.
What Drives the Cost of Cat6A Plenum Cable
1. Copper content (the biggest factor)
Cat6A uses 23AWG conductors, and a 1000ft box holds eight of them per run, which works out to roughly 12 to 13 lb of copper. Solid bare copper is the main material cost, so it is the first place a low-quality product cuts corners.
- 100% solid bare copper: meets TIA-568 requirements, passes PoE heat loads, and holds its rated performance over 328 ft.
- Copper-clad aluminum (CCA): cheaper, but it has higher resistance, runs hotter under PoE, and is widely rejected in commercial specs.
52Networks states 100% solid bare copper on its Cat6A plenum product pages.
2. Shielding
- Unshielded (UTP): the cheapest and the most common choice for office and Wi-Fi access point runs.
- Foil shielded (F/UTP): adds an aluminum foil wrap and drain wire to block interference near heavy electrical equipment. Expect to pay roughly 60 to 70% more.
- Fully shielded (S/FTP): the most expensive, and usually specified for data centers and high-interference environments.
Shielded cable also costs more to install, since it needs shielded jacks and proper grounding. Use it only if your environment calls for it. See our Cat6A cable guide for how to decide.
3. Plenum (CMP) jacket and insulation
Plenum cable uses a low-smoke, flame-retardant jacket, often paired with FEP insulation, so it can go in air-handling spaces such as drop ceilings. That fire-safe compound costs more than standard riser material, usually by 15 to 20% or more. A plenum rating adds no speed. You are paying for code compliance.
4. Third-party certification (ETL or UL)
ETL Listed and UL Listed cable has been independently tested for fire safety and performance. Testing, factory audits, and ongoing certification add cost, which is one reason unlisted cable is cheaper. ETL listing is accepted as equivalent to UL listing by most building inspectors, but check with your local inspector.
Many 52Networks Cat6A plenum listings state ETL, UL, RoHS-3, and ANSI/TIA-568.2-E compliance.
5. Construction and packaging
Extras that move the price slightly: a spline or separator between pairs, footage markings, color, and packaging (pull box vs wooden spool). Volume discounts also matter. Most suppliers drop the per-box price at 10 to 50+ boxes.
What Is a Fair Price for Cat6A Plenum 1000ft in 2026?
These ranges come from public supplier listings in November 2026. Prices change often, so confirm before ordering.
| Type | Typical price per 1000ft | Per foot |
|---|---|---|
| Unshielded, bare copper, listed (value suppliers) | ~$290–$350 | ~$0.29–$0.35 |
| Unshielded, bare copper (mainstream suppliers) | ~$450–$550 | ~$0.45–$0.55 |
| Unshielded, single-box retail or premium brand | up to ~$625 | up to ~$0.63 |
| Shielded F/UTP | ~$500–$780 | ~$0.50–$0.78 |
Real pricing examples
52Networks
- Cat6A plenum, yellow, 23AWG, 750 MHz: $289.99 (reduced from $340.00), about $0.29 per foot
- Cat6A plenum bare copper, black: $319.00 (reduced from $340.00), about $0.32 per foot
- Cat6A plenum shielded: $499.99, about $0.50 per foot
Other suppliers (unshielded)
- trueCABLE: $456.02 to $480.67 depending on quantity
- Computer Cable Store: $543.20 at 2+ boxes
- Cmple: $624.95 for one box, dropping to $499.96 at 50+
Shielded for comparison
- Computer Cable Store, shielded: $778.71
Why 52Networks is a useful pricing benchmark
52Networks is a good example of a transparently priced source. The price, color, SKU, stock count, and spec table sit on the product page, and the pages state 100% solid bare copper, CMP rating, and ETL listing. The listed price is also at the low end of what a listed, bare copper Cat6A plenum cable costs, and it shows you do not need to pay $500+ to get a compliant box. They also offer bulk and pallet quotes for larger jobs.
Red Flags: When Cat6A Plenum Is Suspiciously Cheap
A price well below about $250 per 1000ft for unshielded, bare copper, listed Cat6A plenum should make you ask questions. Watch for these signs:
- No mention of “bare copper” or “solid copper.” If the listing is vague about conductor material, assume the worst.
- CCA or “copper-clad” in the specs. Even one line in the description is enough to skip it.
- No ETL or UL listing, or a listing with no file number. “Compliant with” or “meets standards” is not the same as listed.
- “CMP” with no jacket marking details. Plenum cable should be printed with its rating on the jacket.
- Wrong conductor size. Cat6A bulk cable is 23AWG. A 24AWG or 28AWG “Cat6A” is a thin or patch-style cable, not true bulk cable.
- Claimed bandwidth with no data sheet. Real suppliers publish a spec sheet. If there is none, ask for one.
- Weight and spool size look off. A box that feels light for 1000ft may be short on copper or footage.
- No return policy, no contact info, no stock count. Price is only half the deal. You need someone to call if a box fails.
- Prices that vary wildly between colors of the same cable. Color alone should not change the price by $100 or more.
How to verify before you order
- Request the data sheet and the ETL or UL listing number, then check it in the certifier’s online directory.
- Look for markings on the jacket: category, CMP, listing mark, AWG, and footage.
- Test a sample box first if you are buying many. A certifier will show you attenuation and NEXT results fast.
- Confirm shielded vs unshielded on the spec sheet before you add to cart.
How to Get the Best Price on a 1000ft Box
- Buy in quantity. Bulk tiers can save 5 to 20% per box.
- Skip shielding unless you need it. It adds a large premium plus installation cost.
- Choose standard colors unless you need color coding.
- Compare per foot, not per box. Make sure all boxes are 1000ft.
- Check freight. Some suppliers include shipping, and some do not.
- Ask for a project quote if you need 10 or more boxes.
Cat6A Plenum vs Cat6 Plenum: Is the Extra Cost Worth It?
Cat6A runs about 45 to 60% more per box than comparable bare copper Cat6 plenum. For that premium you get full 10G at 328 ft (Cat6 reaches about 165 ft), higher bandwidth, and better PoE heat handling. For new commercial builds with a long life, that is usually worth it. Read our full Cat6A vs Cat6 plenum price comparison for the installed-cost breakdown.
Frequently Asked Questions
How much does 1000ft of Cat6A plenum cable cost in 2026?
Unshielded, bare copper, listed Cat6A plenum costs about $290 to $550 per 1000ft box. Shielded versions cost about $500 to $780.
What is the Cat6A plenum cost per foot?
Roughly $0.29 to $0.55 per foot for unshielded and $0.50 to $0.78 per foot for shielded.
Why is some Cat6A plenum cable so cheap?
Usually because of CCA conductors, missing certification, or thinner copper. Bare copper, a plenum jacket, and third-party listing all cost real money.
Is ETL listed cable as good as UL listed?
Both are independent listings from nationally recognized testing labs. ETL listing is commonly accepted as equivalent to UL by inspectors, but confirm with your local authority.
Do I need shielded Cat6A plenum?
Only in high-interference areas, such as near heavy electrical equipment or in dense data center runs. Most office and Wi-Fi installs use unshielded.
Is plenum Cat6A faster than non-plenum?
No. The plenum jacket affects fire and smoke safety, not speed. Use it only where code requires it.
Final Word
For most projects, a fair price for Cat6A plenum 1000ft is about $290 to $550 for unshielded bare copper that is ETL or UL listed. Pay attention to copper content, the listing, and the spec sheet, not only the sticker price. A transparently priced source like 52Networks shows what a legitimate budget price looks like. If an offer is far below that range, verify it before you order.
Prices were collected from public supplier listings in November 2026 and may have changed. Confirm current pricing, conductor type, and certification before placing a bulk order.
Related Projects
Read More
UncategorizedOctober 29, 2026
How to Build a Reliable Network Infrastructure for a Small Business
How to Build a Reliable Network Infrastructure for a Small Business
A reliable network infrastructure is essential for keeping a small business connected, productive, and secure. From computers and printers to cloud applications, security cameras, and wireless access points, every connected device depends on a network that performs consistently.Building a dependable...
UncategorizedNovember 19, 2026

